Stahlwille SW713R/6 3-60 N·m 713R SENSOTORK Torque and Angle Wrench, 9 x 12 mm holder

The Stahlwille SENSOTORK 713R is an electronic torque and angle-controlled wrench with a 60-tooth reversible insert tool ratchet (No 735) and a QuickRelease safety lock, for clockwise and anticlockwise use. This listing covers three sizes: size 6 (3 to 60 N·m, 3/8" drive), size 20 (10 to 200 N·m, 1/2" drive) and size 40 (20 to 400 N·m, 3/4" drive) (manufacturer-stated).

Torque and angle are shown together, and angle is measured without a reference arm. On sizes 6 and 20 the readings are independent of the point where force is applied. Advance warning points can be set for acoustic (buzzer), tactile (handle vibration) and visual (LED and display) signals, the units are N·m, ft·lb or in·lb, and readings can be stored, transmitted to a PC by USB or simply displayed. A password protects the settings (manufacturer-stated).

Stahlwille states a torque display deviation of ±1% ±1 digit and an angle display deviation of ±1°, and that the wrench meets the requirements of DKD-R 3-7, class 2 (manufacturer-stated). Two calibration certificates are supplied and the wrench runs on two AA batteries.

Where this product is used

• Torque-and-angle tightening of critical joints
• Joints where the tightening must be assessed and recorded
• Work in both tightening directions without changing tools

Features

• Torque and angle shown together, with angle measured without a reference arm (manufacturer-stated)
• 60-tooth reversible ratchet No 735 included (manufacturer-stated)
• QuickRelease safety lock for firm locking and rapid change of insert tools (manufacturer-stated)
• Acoustic, tactile and visual warning signals with freely set trigger points (manufacturer-stated)
• Units of N·m, ft·lb and in·lb (manufacturer-stated)
• USB interface and password protection (manufacturer-stated)
• Easy extension setting: enter the new value and the wrench recalculates (manufacturer-stated)
• Application temperature range of -20 to +60 °C (manufacturer-stated)
• Meets the requirements of DKD-R 3-7, class 2 (manufacturer-stated)

Common specifications

Key specifications

Figures are Stahlwille's (manufacturer-stated).

Selecting the right option

Choose by the torque range you need and the drive you work with: size 6 for 3 to 60 N·m with a 3/8" drive, size 20 for 10 to 200 N·m with a 1/2" drive, and size 40 for 20 to 400 N·m with a 3/4" drive. If you do not need a built-in ratchet and want a wider size range, see the Stahlwille 714 electronic torque and angle wrenches, 1 to 400 N·m. For a recorded result without angle control, see the Stahlwille 730D electronic torque wrenches, 10 to 650 N·m.

Related products

Related Stahlwille torque tools: Stahlwille 714 electronic torque and angle wrenches, 1 to 400 N·m, Stahlwille 730D electronic torque wrenches, 10 to 650 N·m, Stahlwille SENSOTORK 7707 W workshop torque testers, 0.4 to 1100 N·m, Stahlwille SmartCheck USB torque wrench testers, 1 to 800 N·m and Stahlwille 730NR torque wrenches with fixed ratchet, 10 to 400 N·m.