Star-M Short-length softwood auger bits, 11mm

Star-M 6 Series is a range of ten short-length combination auger bits for drilling holes that pass completely through timber. Diameters run from 10mm to 27mm, with overall lengths of 190, 200 or 210mm depending on size.

Spiral length, shank size and maximum speed for each size follow the Star-M No.6 Combination Auger Bit table. The bit is made from high carbon steel and has a burr-free lead screw for quick, on-target starts and smooth cutting. The 6 Series is shorter overall than the 4S Series at the same diameter.

Where this product is used

• Drilling holes that pass completely through timber
• Use with an electric drill or a cordless drill over 14.4V, sizes under 13mm are also for a quick change impact driver over 14.4V

Features

• Burr-free lead screw for quick, on-target starts and smooth cutting
• Made from high carbon steel
• Hexagon shank: 6.35mm up to 13mm, 10mm from 14mm
• Maximum drill speed of 3,000rpm up to 19mm and 1,500rpm from 21mm

Key specifications

Choosing the right option

Choose by hole diameter. The 10, 11 and 13mm bits have a 6.35mm shank, and the 10 and 11mm sizes are also for a quick change impact driver (over 14.4V); from 14mm the shank is 10mm. The 21, 22 and 27mm bits are 210mm long and need the lower 1,500rpm speed limit. For more reach in softwood see the 4S Series standard-length auger drill bits or the 4L Series extended-length auger drill bits; for hardwood see the 8M Series medium-length hardwood auger drill bits or 8L Series long hardwood auger drill bits.

See also: 4S Series standard-length auger drill bits, 8M Series medium-length hardwood auger drill bits, 8L Series long hardwood auger drill bits, 4L Series extended-length auger drill bits.