Buy Aerosols Online in Australia
Industrial Aerosol Spray Paint Selection — Quick Reference
Industrial aerosol spray paints — COLD GALVANISING + ZINC PRIMER + ETCH PRIMER + LINE MARKING from Anchor + Dy-Mark + Galmet + Molytec + Boston + Re-Po + CRC. Convenient touch-up + small-area painting for workshop + maintenance + civil.
| Aerosol Type | Best For |
|---|---|
| Cold Galvanising (Zinc-Rich) | Bare steel corrosion protection |
| Zinc Primer | Pre-coat + corrosion-resistant base |
| Etch Primer (Self-Etch) | Aluminium + galvanised substrate |
| Acrylic Topcoat (Various Colours) | Workshop + machinery topcoat |
| Line Marking Spray | Civil + warehouse + workshop floor |
| Heat-Resistant Paint | Engine + exhaust + manifold |
| Hammertone Paint | Machinery — textured finish |
| Chrome / Metallic | Decorative + restoration |
| Lubricant Aerosol | See penetrating lubricants |
Critical: Surface prep = critical for adhesion — clean + degrease + light abrasion. Shake well + steady consistent pass = even coat. Avoid heavy single coats (runs + sags). PPE — respirator + ventilation + gloves. Brands: Anchor, Dy-Mark, Galmet, Molytec, CRC. Companion: paints + equipment, specialty paint, rust treatments.
Industrial Aerosol Spray Paints: Cold Galvanising, Zinc Primer, Etch Primer and Line Marking from Anchor, Dy-Mark, Galmet, Molytec, Boston, Re-Po and CRC
Industrial aerosol spray paints and coatings provide fast, portable corrosion protection, surface marking and touch-up painting for metalwork, structural steel, plant, equipment and workshop environments.
Aerosol-format coatings are essential for maintenance painting of welds, cut edges, drilled holes and abraded areas where full brush or spray application is impractical, for marking out areas on concrete floors and ground surfaces, and for non-destructive crack and flaw detection on welds and components.
AIMS Industrial stocks 61 industrial aerosol products from Anchor, Dy-Mark, Galmet, Molytec, Boston, Re-Po and CRC — industrial paint, coating and maintenance chemical brands used extensively across Australian manufacturing, infrastructure, mining and construction industries.
The Industrial Aerosols Range
Our extensive product range covers cold galvanising sprays, zinc-rich anti-corrosion primers, etch primers, touch-up paints, line marking paints, structural primers, crack detection systems and specialty industrial coatings.
- Cold Galvanising & Zinc-Rich Sprays: Cold galvanising aerosols — including Galmet ColdGal, Galmet DuraGal Silver, Molytec Silvagal Cote, Boston Protect and CRC Zinc It — deposit a high-zinc-content coating that provides galvanic corrosion protection on bare steel, weld seams, cut edges and abraded areas. Zinc-rich cold gal is specified for touch-up of hot-dipped galvanised, Zincalume and Colorbond surfaces after cutting, drilling and welding.
- Etch Primers: Etch primer aerosols — including Anchor Industrial Etch Primer, Galmet Keytite Etch Primer, CRC Etch-10 and CRC Etch It — chemically key into bare metal surfaces to provide a corrosion-inhibiting primer coat that promotes adhesion of topcoats. Etch primer is the correct first coat on bare steel, aluminium and galvanised surfaces before painting.
- Structural & Industrial Primers: Anchor Industrial Structural Primer, Anchor Prime and Boston Aerosol Paint Primer provide a heavy-build anti-corrosive undercoat on steel structural sections, plant and equipment as a first coat before topcoat application. Available in red oxide and grey formulations.
- Touch-Up Aerosol Paints: Anchor Bond and Anchor Max aerosol touch-up paints cover spot repairs on painted equipment, machinery, vehicles and structures. The fluorescent range — including Anchor Fluorescent Acrylic Lacquer — provides high-visibility colour for safety marking and hazard identification on equipment, bollards and industrial infrastructure.
- Line Marking Sprays: Dy-Mark Spray & Mark, Dy-Mark Line Marking, Dy-Mark Spray Writer and Dy-Mark Zinc Guard aerosols provide line marking capability for factory floors, car parks, road works and plantation/forestry environments. Water-based and solvent-based options are available to suit different surface types and weather conditions.
- Crack Detection (Flaw Detection): Dy-Mark Flawcheck system provides a dye penetrant inspection system for detecting surface cracks, porosity and discontinuities in welds and components. The system uses a cleaner, penetrant and developer applied in sequence to reveal surface defects invisible to the naked eye — a non-destructive testing (NDT) method widely used in pressure vessel, structural and aerospace maintenance.
Expert Support: Need help buying the right product for your application? Contact our team for application-specific advice or request a quote.
Australian Business, Local Supply: As a proudly Australian business since 1988, we stock locally and work with trusted local Australian manufacturers and distributors to ensure fast, reliable supply.
Also see our rust treatments & undercoats, cleaning chemicals, marking tools, maintenance chemicals and safety signs & labels ranges.