Buy Grease Reels Online in Australia
Grease Reel Selection — Quick Reference
Grease reels = SPRING-RETURN hose reels PERMANENTLY plumbed into workshop bay's GREASE DISPENSING system. Convenient + organised + reliable grease delivery. Workshop bay + service centre + production lubrication.
| Grease Reel Type | Best For |
|---|---|
| Spring-Return Grease Reel | Workshop bay — auto-retract |
| Manual Wind Reel | Economical alternative |
| Common Lengths (10m / 15m / 20m+) | Match to bay coverage |
| Grease Hose (Reinforced) | High-pressure rated |
| Grease Control Gun | Drip-free delivery nozzle |
| Wall / Ceiling Mount | Permanent installation |
Critical: Match grease hose + fittings to GREASE PRESSURE (workshop typically 5,000-15,000 psi grease pump). Inspect hose regularly — high-pressure failure = injection injury (immediate medical attention). Brands: Retracta, Macnaught. Companion: grease equipment, grease guns, hose reels + accessories.
Grease Reels
Grease reels are spring-return hose reels permanently plumbed into a workshop bay's grease dispensing system, providing convenient access to pressurised grease at a fixed location without the need to carry drums or bulk containers. The reel feeds a flexible high-pressure hose that can be pulled to the work point and retracts automatically when released. In workshop environments with multiple service bays or frequent lubrication tasks, a fixed grease reel system eliminates the handling of grease drums and guns, significantly improving lubrication program efficiency and reducing contamination risk. AIMS Industrial supplies grease reels for workshop, service bay, and industrial plant lubrication applications.
Reel Construction and Pressure Ratings
Grease reels must be engineered for the high working pressures of grease dispensing systems — grease guns operate at 200–500 bar, and the hose and reel components must sustain this pressure over continuous service. Quality grease reels use steel hose construction with swaged end fittings rated for the working pressure, a heavy-duty spring-return mechanism, and a sealed swivel at the drum centre that maintains a leak-free rotary connection as the hose is paid out and retracted. The swivel is the most maintenance-intensive component of a grease reel — inspect regularly for leakage and replace the swivel seal when grease weeping is detected.
Hose Length and Fitting Configuration
Grease reel hose lengths typically range from 6m to 15m depending on the workshop bay depth and the furthest lubrication point to be reached. Longer hose increases the volume of grease in the line, affecting delivery accuracy for precision lubrication programs where specific dose quantities are important. End fittings are selected to match the grease gun coupler or connect directly to the dispense valve. Most reels use 1/4" BSP connections at both the inlet (supply line) and outlet (hose end).
Plumbing into Bulk Systems
Grease reels are typically fed from a bulk drum pump or central lubrication system — a dedicated supply line runs from the bulk container to each reel, keeping the reel charged with grease at working pressure. Bulk drum pump capacity must be matched to the number of reels and the expected simultaneous use. For grease reel selection, bulk system design, and lubrication equipment supply, contact our team.
Installation and Maintenance of Grease Reels
Grease reels should be mounted at a height that allows the hose to retract cleanly without kinking or coiling on the floor. Ensure the inlet connection is properly sealed and that the swivel joint at the reel hub is lubricated — a dry swivel is a common source of leaks on reels that have been in service for some time. Check the retraction spring tension periodically and adjust if the hose retracts too aggressively or fails to retract fully. Flush the hose with fresh grease before first use to remove any assembly lubricant or contamination from the manufacturing process.
People Also Ask — Grease Reels
Q: What pressure rating does a grease reel's hose and reel need to handle?
Grease guns operate at 200-500 bar working pressure, so the reel and hose must be engineered for that continuously. Quality grease reels use steel hose construction with swaged end fittings rated for the working pressure, plus a heavy-duty spring-return mechanism and a sealed swivel at the drum centre that keeps a leak-free rotary connection as the hose pays out and retracts.
Q: What's the most common point of failure on a grease reel?
The swivel at the reel hub is the most maintenance-intensive component — inspect it regularly for leakage and replace the swivel seal as soon as grease weeping is detected. A dry or worn swivel is the most common source of leaks on reels that have been in service for a while.
Q: What hose length and fitting size does a grease reel typically use?
Hose lengths typically range from 6m to 15m depending on the workshop bay depth and the furthest lubrication point to be reached. Most reels use 1/4" BSP connections at both the inlet (supply line) and the outlet (hose end) — though longer hose does increase the volume of grease held in the line, which affects delivery accuracy where specific dose quantities matter.
Q: How do I size the bulk drum pump supplying multiple grease reels?
Grease reels are typically fed from a bulk drum pump or central lubrication system via a dedicated supply line to each reel. The bulk pump's capacity must be matched to the number of reels it feeds and the expected simultaneous use — undersizing the pump starves reels when more than one bay is drawing grease at once.
Q: What should I do before putting a new grease reel into service?
Flush the hose with fresh grease before first use to clear out any assembly lubricant or manufacturing contamination. Also confirm the inlet connection is properly sealed, lubricate the swivel joint at the reel hub, and check the retraction spring tension so the hose retracts cleanly without kinking or coiling on the floor.