Beaver 2 t integral push trolley and girder clamp

Beaver's integral push trolley and girder clamp combines a push trolley with a girder clamp, so a load can be attached to an overhead beam and moved along it.

The integral push trolley and girder clamp complies with AS 1418.2. Every unit is operationally tested to 150% of its rated capacity and comes with an individual test certificate, and each unit has a serial number stamped on the body and on the aluminium ID plate that matches the test certificate. Lifting equipment must be used within its marked working load limit (WLL), inspected before each use, and selected and used in line with your site lifting procedure and the relevant Australian Standards.

Where this product is used

• Attaching a load to an overhead beam and moving it along the beam, for permanent or temporary mounting
• Fixing a lifting point to a steel beam flange

Features

• Integral push trolley and girder clamp in one unit
• Threaded spindle adjusts the clamp to the beam width, secured by a locking lever against the side plate
• Zinc plated threaded spindle
• Steel construction with a durable enamel finish, black on YTE models
• Built-in load bar for reduced headroom
• Serial number stamped on the body and on the ID plate, matching the test certificate

Key specifications

Choosing the right option

Dimensions are in millimetres and the letters follow Beaver's drawing.

Related lifting products: Beaver YC Industrial Girder Clamps, 1 to 10 t, Beaver Push Girder Trolleys, 500kg to 10 t, Beaver 3S Grade 80 Industrial Manual Chain Blocks, 3 m Lift, 0.5 to 5 t.