Beaver lever wire rope hoists

Each hoist comes complete with an operating lever and 20 m of wire rope on a reel, with a safety latch hook at one end and a tapered end for inserting into the unit.

The hoists comply with AS 1418.2. Every Big Haul is tested and has its own serial number that traces to a test certificate. The lifting and pulling ratings are separate: use the lifting rating for any overhead or suspended load. Lifting equipment must be used within its marked working load limit (WLL), inspected before each use, and selected and used in line with your site lifting procedure and the relevant Australian Standards.

Where this product is used

• Pulling, lifting, lowering, spanning and securing loads over large distances
• Powered lifting in workshops and production areas

Features

• Compact, high strength aluminium alloy housing with a large flat base for stability in horizontal and vertical working positions
• Overload protection built in: a shear pin in the forward lever shears at approximately 25% overload, and broken pins can be replaced without removing the load
• Forward and reverse levers in tandem for a slim design
• Rope clamp released with a lever for easy rope installation
• Anchor bolt for connecting load hooks, wire rope or chain slings
• Every unit tested and given an individual serial number that traces to a test certificate
• Complete with an operating lever and 20 m of wire rope on a reel

Key specifications

Choosing the right option

Choose by the heaviest load you will lift, using the lifting rating, and allow for slings and hooks. The 20 m rope length sets how far you can lift or pull in a single run.

Other Beaver lifting and pulling products: the: Beaver Brake Hand Winches, 360kg to 1180kg Rated Pulling, Beaver 240V Single Phase Electric Pull-Lift Winch, 250kg and 300kg Rated Capacity, Beaver Lift-All 240V Single Phase Electric Chain Hoist, 500kg and 1000kg, 3 m Lift, Beaver 3S Grade 80 Industrial Manual Chain Blocks, 3 m Lift, 0.5 to 5 t.