Beaver 240V Single Phase Electric Pull-Lift Winch, 250 kg, 29 m Pull (BPL1025)

The Beaver 240V single phase electric winch runs on 240 volt, 50 Hz single phase power and has a 24 volt IP65 pendant control with an emergency stop (manufacturer-stated). This listing carries the 250 kg and 300 kg rated capacities, codes BPL1025 and BPL1030, each with a 29 m effective pull height and 30 m of wire rope specified (manufacturer-stated).

Beaver describes the range as robust construction suitable for building sites, slipways and industrial use (manufacturer-stated). The old title of this listing said 200 - 300 kg; Beaver lists nothing below 250 kg in this range.

Beaver's website gives no standard for the single phase winches and has no description on its single phase winch page; the figures here are from Beaver's manual and data sheet. Beaver does not publish the load at which the overload clutch operates. Beaver calls these Pull Lift winches and gives a single rated capacity for each code. It does not say whether that figure applies to both pulling and lifting, and publishes no separate lifting rating, so ask AIMS or Beaver before using one to lift or suspend a load. Lifting equipment must be used within its marked working load limit (WLL), inspected before each use, and selected and used in line with your site lifting procedure and the relevant Australian Standards. If you are unsure what suits your lift, contact AIMS or a qualified rigger before ordering.

Where this product is used

• Building sites, slipways and industrial use, as Beaver describes the winches (manufacturer-stated)

Features

• Direct coupling from the motor to the gearbox, for low power loss and accurate speed control (manufacturer-stated)
• Brake designed for static and dynamic loading, with large friction area discs that apply automatically on power loss and need no adjustment (manufacturer-stated)
• Automatic load brake and overload clutch (manufacturer-stated)
• One piece cast gearbox, with planetary gears and a main drive gear made from a solid billet of steel (manufacturer-stated)
• Sealed, grease filled ball bearings (manufacturer-stated)
• 24 volt IP65 pendant control with an emergency stop (manufacturer-stated)
• Wire rope secured to the drum with a set screw for rope retention (manufacturer-stated)
• Cast steel foot mountings (manufacturer-stated)

Dimensions

Dimensions in millimetres, as listed by Beaver.

Key specifications

Codes, capacities, speeds, motor power, wire rope and weights are from Beaver's Materials Handling Technical Manual (Vol. 4) and data sheet. Beaver prints the wire rope length in millimetres; it is read as metres, which matches the effective pull height, and Beaver's website repeats the same mm heading. Beaver lists motor power in horsepower only, and the kilowatt figure is AIMS's conversion. Beaver prints speed as a range. Beaver does not define dimension letters B to F, which are in millimetres.

Selecting the right option

Choose the voltage to match the power supply on site, then the rated capacity to suit the load, allowing for friction and any rigging. The duty rating is 25% ED, so check it against how often you will run the winch, and check the effective pull height against the distance you need. If you are unsure, ask AIMS or a qualified rigger.

Related products

Other Beaver winches and hoists: the 415V three phase electric winch, brake hand winches, electric mini hoist and the Big Haul wire rope hoist. Check each item is rated for the lift or pull before you order.