FYH SAA203 Insert Bearing, 17 mm Bore, Eccentric Collar, Cylindrical O.D., 40 mm O.D.
Available
The FYH SAA203 is an eccentric collar insert bearing with cylindrical O.D. with a 17 mm bore. It measures 40 mm O.D., with a basic dynamic load rating of 9.55 kN and a static rating of 4.8 kN.
It has an eccentric locking collar and a cylindrical O.D. for press-fit mounting directly into machinery; it is not self-aligning and cannot be mounted in traditional housings.
Where this product is used
- Machinery with a machined bore that takes a cylindrical O.D. insert
- Conveyor rollers, drive shafts and idler stations
- Fans, blowers and pumps
- Agricultural, construction and general industrial machinery
Features
- Eccentric locking collar for a 17 mm shaft: the collar engages the inner ring and a set screw is tightened to hold it
- Cylindrical O.D. for press-fit mounting directly into machinery; not self-aligning and not for traditional housings
- Basic dynamic load rating Cr 9.55 kN and static rating C0r 4.8 kN
Key specifications
| Specification | Detail |
|---|---|
| Type | Insert bearing (deep groove ball bearing) with eccentric locking collar and cylindrical O.D. |
| Model | SAA203 |
| Bore diameter d | 17 mm |
| Outer diameter D | 40 mm |
| Locking | Eccentric locking collar with a set screw |
| Outer ring | Cylindrical O.D. |
| Duty | Light |
| Basic dynamic load rating Cr | 9.55 kN |
| Basic static load rating C0r | 4.8 kN |
| Factor f0 | 13.2 |
| Data basis | The catalogue lists SAA203FP7 but no row under the designation SAA203. O.D., Cr, C0r and f0 are taken from the catalogue row SAA203FP7 (same size number); the widths and mass of SAA203 are not shown |
| Brand | FYH (FYH Inc., Japan) |
Selecting the right option
This page is for the single model SAA203, with a 17 mm bore. If you need another shaft size, the related pages below list the other sizes in this range.
Metric bores are in mm: match the bore to the shaft you have.
Catalogue data basis: The catalogue lists SAA203FP7 but no row under the designation SAA203. O.D., Cr, C0r and f0 are taken from the catalogue row SAA203FP7 (same size number); the widths and mass of SAA203 are not shown.
Fitting and use
Check the load against the catalogue figures in the Model Details before ordering, and apply a suitable safety factor.
Press-fit the insert into a machined bore. It is not self-aligning, so the bore must be machined square to the shaft. Fit the collar against the inner ring and tighten its set screw.
If you are unsure which insert suits a shaft and housing, send AIMS the part numbers or sizes and we will confirm the fit.
Related products
Related FYH insert bearing pages: SAA200 insert bearings, 5/8 to 1 1/8 in bore (imperial), SAA200 insert bearings, 20 to 40 mm bore (metric), SA200 insert bearings, 1/2 to 1 1/2 in bore (imperial), SA200 insert bearings, 7/8 to 1 7/16 in bore (imperial) and SA200 insert bearings, 12 to 40 mm bore (metric). Single-model pages in this range: SAA201-8FP7, SAA205-16FP7, SAA206, SAA206-20FP7 and SAA207-20FP7.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
