KCP KW10 Flex Coupling Hub Size 5, 62 Nm
Available
This is the hub for the KCP KW10 Type flex coupling, in sizes 5 to 60. One hub is fitted to each shaft, with the flexible element between them and the cover over the element.
The catalogue lists a maximum and a minimum bore for each size, from 12.7 mm up to 135 mm, so check the shaft diameters against the size you choose. A complete coupling uses two hubs, one element and one cover.
Where this product is used
- Fitting a KW10 Type flex coupling to a motor, gearbox, pump or other shaft
- Replacing a worn or damaged hub on an installed KW10 coupling
- Making up a complete KW10 coupling with matching element and cover
Features
- Seven sizes, 5 to 60, with torque ratings from 62 Nm to 4,011 Nm
- Maximum bore up to 135 mm (size 60) and minimum bore from 12.7 mm (size 5)
- Same size as the matching KW10 element and cover
- Full dimension, weight and bore table for every size on this page
Key specifications
| Specification | Detail |
|---|---|
| Component | Hub |
| Brand | KCP |
| Series | KW10 Type flex coupling |
| Sizes | 5, 10, 20, 30, 40, 50 and 60 |
| Torque rating | 62 to 4,011 Nm, depending on size |
| Allowable speed | 2,500 to 4,500 rpm, depending on size |
| Bore range | 12.7 mm (minimum bore, size 5) to 135 mm (maximum bore, size 60) |
Available sizes
| Size | Torque (Nm) | Speed (rpm) | Bore (mm) | Coupling weight (kg) |
|---|---|---|---|---|
| 5 | 62 | 4,500 | 12.7 to 38 | 1.35 (nylon) / 1.49 (steel) |
| 10 | 130 | 4,500 | 15.88 to 48 | 2.49 (nylon) / 2.72 (steel) |
| 20 | 316 | 4,500 | 19.05 to 60 | 5.64 (nylon) / 6.09 (steel) |
| 30 | 520 | 4,500 | 25.4 to 65 | 9.41 (nylon) / 10 (steel) |
| 40 | 1,028 | 3,600 | 28.58 to 85 | 17.1 (nylon) / 18.1 (steel) |
| 50 | 2,508 | 3,000 | 31.75 to 105 | 35.8 (nylon) / 37.7 (steel) |
| 60 | 4,011 | 2,500 | 50.8 to 135 | 66.4 (steel) |
Selecting the right option
Choose the size whose torque rating covers the design torque of the drive, including a service factor suited to the application, then check that the shaft diameters fall within the bore range for that size and that the allowable speed is not exceeded.
The element, both hubs and the cover must all be the same size. A complete coupling uses two hubs, one element and one cover, and each part is listed separately on the AIMS site: KW10 flex coupling element and KW10 flex coupling cover.
The catalogue page for this product, with the full dimension table, can be downloaded from the Catalogue section of this page.
Fitting and use
Catalogue dimensions are reference only. Contact AIMS to confirm actual measurement if a specific dimension is critical to your application.
Related products
Other parts for the KW10 Type flex coupling: KW10 flex coupling element and KW10 flex coupling cover.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
-
5
Model Number: 5KW10-H
-
10
Model Number: 10KW10-H
-
20
Model Number: 20KW10-H
-
30
Model Number: 30KW10-H
-
40
Model Number: 40KW10-H
-
50
Model Number: 50KW10-H
-
60
Model Number: 60KW10-H
