Mackay V-shaped marine mount, 40kg

Mackay V-shaped marine mount works the elastomer in shear and compression. It is made from two metal parts: it installs with a screw at the top and two holes for securing it to the chassis. The V-shaped design gives major deflection at low loads, so the natural frequency is low, which suits engines that normally idle. It comes in four Duro hardnesses, 40 to 70, for loads of 40 to 150kg at 5 to 6mm static deflection.

Where this product is used

• Small vehicles or machines, small and medium-sized gen sets and marine engines
• Applications where the load of the suspended unit is low and the level of vibration isolation is high

Features

• V-shaped architecture gives major deflection at low loads, so a low natural frequency
• Three different stiffnesses per axis X, Y and Z, so the modes of the suspended unit can be adjusted for optimum isolation
• Two metal parts: top screw fixing and two holes for securing to the chassis
• Same 205 x 60mm base and 1.7kg weight across all four Duro versions

Key specifications

Choosing the right option

Pick by load first: each part number has its own Duro and load (40, 75, 100 or 150kg), so work out the share of the unit weight each mount carries and pick the nearest rating. Check the 205 x 60mm base and the 12.2mm mounting holes against your chassis, and the M16 x 1.5 stud against your fixing. All properties are nominal.

Related Mackay products: Mackay Single Shear V-Shaped Generator Isolator, Mackay BRB Flange Isolator - Small, Mackay Combination Isolator M104.