Shin-Yain SY81546-IMP Drill Chuck Arbor, NT(ISO) 40, JT6
Available
The Shin-Yain imperial drill chuck arbor has an NT(ISO) 7:24 shank at one end and a Jacobs taper at the other, with an imperial thread. The Jacobs taper end takes a drill chuck with a matching JT bore.
Three models are available: NT(ISO) 30 with JT3 (1/2-12 thread), NT(ISO) 30 with JT6 (1/2 thread) and NT(ISO) 40 with JT6 (5/8 x 11 thread).
Match the NT(ISO) size to your spindle and the JT number to your drill chuck. Use the metric-thread arbor if your machine has a metric draw bar.
Where this product is used
- Mounting a drill chuck on a machine with an NT(ISO) spindle and an imperial draw bar
- Drilling, reaming and tapping set-ups using a Jacobs taper chuck
- Workshop and toolroom machines
Features
- NT(ISO) 30 and 40 shanks (7:24)
- Jacobs taper JT3 or JT6 for mounting a drill chuck
- Imperial thread: 1/2-12, 1/2 or 5/8 x 11
- Three models: SY81533-IMP, SY81536-IMP and SY81546-IMP
Key specifications
| Specification | Detail |
|---|---|
| Brand | Shin-Yain |
| Product | Drill chuck arbor, imperial thread |
| Shank | NT(ISO) 30 and 40 (7:24) |
| Chuck taper | Jacobs taper JT3 and JT6 |
| Thread (inch) | 1/2-12, 1/2 and 5/8 x 11 |
| Models | SY81533-IMP, SY81536-IMP, SY81546-IMP |
Models
| Model | Shank | Chuck taper | Thread (inch) |
|---|---|---|---|
| SY81533-IMP | NT(ISO) 30 | JT3 | 1/2-12 |
| SY81536-IMP | NT(ISO) 30 | JT6 | 1/2 |
| SY81546-IMP | NT(ISO) 40 | JT6 | 5/8 x 11 |
Selecting and fitting
Check the shank size against your spindle, the JT number against your drill chuck and the thread against your draw bar. Contact AIMS if you are unsure which thread your machine uses.
Specifications are as listed by AIMS for each model. Contact AIMS to confirm a dimension if it is critical to your application.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
-
1/2-12mm drill bit
Model Number: SY81533-IMP
-
1/2mm drill bit
Model Number: SY81536-IMP
-
5/8 x 11mm drill bit
Model Number: SY81546-IMP
