SY 100-2 H Heavy ASA Duplex Roller Chain Connecting Link, 1-1/4 in Pitch
Available
SY connecting links join the ends of a length of heavy ASA duplex roller chain into a continuous loop. Each size here is matched to the SY chain of the same number, so select the link with the same chain number, strand count and series as your chain.
Made in Japan by Sugiyama Chain Co., Ltd. Supplied individually. This listing covers 3 sizes (100 to 140). H (Heavy) series chain uses link plates one size thicker than standard, giving more capacity without fatigue failure of the plates.
Where this product is used
- Heavy-duty drives with higher or fluctuating loads
- Crusher, mixer and mill drives
- Presses and heavy conveyors
- Drives where standard chain runs close to its limit
Features
- Matched to the SY chain of the same number and series
- Joins the chain ends into a continuous loop
- Made in Japan by Sugiyama Chain Co., Ltd
- Supplied individually
Key specifications
| Specification | Detail |
|---|---|
| Brand | SY (Sugiyama Chain Co., Ltd) |
| Series | H heavy |
| Standard | ASA (ANSI) |
| Strands | Duplex |
| Component | Connecting link |
| Chain sizes | 100 to 140 (3) |
| Pitch | 1-1/4 in to 1-3/4 in (31.75 to 44.45 mm) |
| Material | Carbon steel |
| Country of origin | Japan |
Available sizes
| Link | Pitch (mm) | Roller W (mm) | Pin dia (mm) | Plate H (mm) |
|---|---|---|---|---|
| 100-2 H | 31.75 | 19.05 | 9.53 | 29.3 |
| 120-2 H | 38.1 | 25.4 | 11.1 | 35.1 |
| 140-2 H | 44.45 | 25.4 | 12.7 | 40.9 |
Selecting the right option
For ASA (ANSI) chain the number is the pitch in eighths of an inch: 40 is 4/8 in (1/2 in), 60 is 6/8 in (3/4 in), 100 is 10/8 in (1-1/4 in). The figure after the dash is the number of strands.
Choose H where standard chain of the same pitch is too lightly rated. The plates are one size thicker, and single strand H chain runs on standard sprockets for its pitch. Multiple-strand H chain is not designed for standard sprockets, so check the sprocket before ordering duplex or triplex.
Fitting and use
Fit the retaining clip or pin the way Sugiyama shows: spring clips go on with the closed end pointing the direction the chain runs, cotter pin prongs are opened to a 60 degree angle, and cotter pins must not be re-used. Use the clip or pin supplied with the link.
Multiple-strand H chain is not designed to run on standard roller chain sprockets (single strand H does).
Chain drives should be guarded. Lock out machine power before removing, installing or servicing chain, wear eye protection when driving or grinding pins, avoid welding or plating assembled chain, and never repair damaged chain by replacing only some of its parts.
Related products
Matching chain: SY Heavy ASA Cottered Roller Chain Duplex 140, 1-3/4 in Pitch, 10 ft Box and SY Heavy ASA Roller Chain Duplex 100-120, 10 ft Box. Matching offset links: SY Heavy ASA Roller Chain Offset Link (Half Link) Duplex 100-140.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
SY Heavy ASA Roller Chain Connecting Link Duplex 100-140: 100H
SKU: A0158144 | Model: 100H-2CL/SY
SY 100-2 H heavy ASA duplex roller chain connecting link, 1-1/4 in pitch. Made in Japan by Sugiyama.

