EasyRoll S3 Series Stainless Steel Swivel Plate Castor - High Temperature Wheel

The EasyRoll S3 series swivel plate castor has a 100mm synthetic monolithic wheel on a stainless steel fork, with a load capacity of 160kg per castor. The top plate is 100 x 85mm with hole centres of 80 x 60mm.

Check the temperature at the wheel for your application, not only the temperature of the room.

Where this product is used

• Oven trolleys and racks
• Food industry equipment
• Freezer trolleys
• Equipment that moves between hot and cold areas

Features

• 100mm synthetic monolithic wheel with a 35mm tread
• Load capacity 160kg per castor
• Stainless steel construction with a pressed stainless steel fork
• Continuous exposure up to +280 °C with peaks of +300 °C, certified for food industry and oven use
• Can be used in freezers down to -40 °C and resists thermal shock
• Resistant to water, most solvents, oils, acids and chemicals
• Permanent lubrication approved by FDA-USDA for contact with food
• Double ball race swivel head, with assembly tolerances controlled to avoid locking points when swivelling
• RoHS and REACH compliant

Key specifications

Choosing the right option

A swivel castor turns to follow the direction of travel and a fixed castor rolls in a straight line. Heat is the main selection factor for this castor, so work out the temperature at the wheel and compare it with the limits above, and allow for how long the castor stays at that temperature. Load capacity is shown per castor, on an average floor at speeds up to 4 km/h. The capacity of a trolley is not the sum of its castors: for a four wheel trolley it is best that each castor is rated for at least 35 percent of the total load, which is the weight of the trolley plus what it carries.

See also: EasyRoll S5 Series Stainless Steel Fixed Plate Castor - Urethane Wheel, Red, EasyRoll S5 Series Stainless Steel Fixed Plate Castor - Nylon Wheel, White, EasyRoll G7 Series Stainless Steel Fixed Plate Castor - Nylon Wheel, White.