Dixon Roll grooved 45° elbow, 8" (200mm)

This Dixon roll grooved 45° elbow turns a grooved pipeline through half a right angle. It is the short pattern, sold as Style 101S, in ductile iron (ASTM A536) with a hot dip galvanised finish (AS4680). It comes in it in 4", 6" and 8" (100, 150 and 200 NB).

The 45° elbow range is rated at 300 PSI and gives centre-to-end dimensions of 76, 89 and 108mm for these sizes. It compares it with Victaulic No. 003 for sizes 32 to 200 NB.

Where this product is used

• Fire protection, water transmission and treatment, and irrigation pipework where a grooved system is used instead of flanged or welded joints
• Offsets and changes of direction at 45° in roll grooved fire services and irrigation pipework

Features

• 45° elbow with roll grooved ends
• Ductile iron (ASTM A536), hot dip galvanised finish (AS4680)
• Working pressure: 300 PSI
• The grooved elbow range is UL listed and FM approved
• Comparable to Victaulic No. 003 (32 to 200 NB)

Key specifications

Choosing the right option

Two 45° elbows make a 90° turn with a gentler sweep than a single 90° elbow. Confirm the pipe OD before ordering and allow for a grooved coupling and gasket at each end.

Those sizes are not part of this product.

Related Dixon grooved elbows: Dixon Roll Grooved 90° Elbow Short - Style 100S - Galvanised, Dixon Standard 11.25° Roll Grooved Elbow - Galvanised and Dixon Roll Grooved 45° Elbow Style 101 Painted - Galvanised.

Couplings: Dixon Roll Grooved Rigid Coupling - Galvanised and Dixon Roll Grooved Coupling Flexible Heavy Duty Galvanised.