Gates AX65 (9012-6065) Tri-Power Notched
Available
Gates Tri-Power notched (cogged) classical V-belts AX section offer improved flexibility over standard wrapped belts, allowing operation on smaller sheave diameters with reduced heat build-up. The cogged construction increases the power rating of classical A/B/C section drives without changing the sheave profile.
Where this product is used
Gates V-belts cover the full range of industrial, agricultural and automotive drive applications. Common end uses include:
- Industrial drive systems — air compressors, pumps, fans, blowers and generators across manufacturing and utilities
- Agricultural machinery including combine harvesters, grain augers, irrigation pumps and crop-processing equipment
- HVAC and refrigeration plant — chillers, cooling towers, air handlers and refrigeration compressors
Key specifications
| Specification | Detail |
|---|---|
| Belt Section | AX |
| Series | Tri-Power — Gates’ raw-edge, moulded-notch classical-section V-belt built for superior performance on heavy-duty drives |
| Construction | Raw edge, moulded-notch (cogged) classical-section construction; exclusive ethylene EPDM rubber compound for extended temperature range; precision-ground sidewalls for uniform wedging action; Flex-Bonded polyester tensile cords for even load distribution; non-self-igniting — will not catch fire from heat build-up even under severe slippage; static conductive (ISO 1813 & RMA IP3-3). Note: per Gates specification, Tri-Power belts longer than 210 in inside length are wrapped, cut-notch construction rather than raw-edge moulded-notch. |
| Nominal Dimensions (Width x Height) | 13 x 8 mm |
| Temperature Range | -57°C to +121°C |
| Belt Matching | Meets Gates V80® tolerances — any Tri-Power belt of the same section and length matches any other; no belt-matching required. Back idlers can be used. |
Selecting the right option
Select by belt section first, then by pitch length. Classical sections run A, B, C, D, E (or Z in metric) — cross-reference to the metric ISO equivalent (13A, 17A, 22A) where needed. Narrow sections (3V/SPA, 5V/SPB, 8V/SPC) carry more power in the same envelope. The XP series (XPZ/XPA/XPB/XPC) are notched versions for improved flex efficiency. Gates PowerBand banded belts join multiple strands — specify these for long centre distances, vertical drives or where belt whip is an issue. Looking for an automotive serpentine belt? Automotive Micro-V drives use the K section — see our automotive Micro-V range and match by OE reference or by rib count and pitch length.
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Gates Tri-Power Notched (Cogged) Classical Section Belt - AX Section: AX65
SKU: A0018198 | Model: 9012-6065
This is the v-belt code AX65 option of the Gates Tri-Power Notched (Cogged) Classical Section Belt - AX Section. Key details for this option: datum length 1690mm, length 1700mm, top width 13mm.
Gates Tri-Power Belt Classical Section - Heavy Duty V Belt
Gates Tri-Power V Belt is built for superior performance on heavy duty drives of classical cross-section.
The raw edge construction and special notch design makes the Tri-Power belt especially suited for drives requiring small diameter pulleys and back idlers.
The ethylene EPDM compound allows the belt to handle extreme temperatures up to +121°C.
Construction
Classical cross-section.
Exclusive ethylene EPDM rubber compound for increased temperature range to resist cracking.
Fibre-loaded compound for improved belt stability.
Raw edge construction.
The moulded notch pattern also reduces noise.
Precision-ground sidewalls give a uniform wedging action.
Flex-Bonded polyester cords for equal load distribution and reduced stress from flexing.
Non self-igniting - the belt will not catch fire from heat build-up, even with severe slippage.
Static conductive - ISO 1813 and RMA IP3-3.
Advantages
15% capacity increase over wrapped belts.
Increase efficiency up to 3% over wrapped belts.
Use smaller diameter pulleys than wrapped belts.
Moulded notches reduce and evenly distribute thermal and bending stresses.
Match free system: all sizes meet Gates V80® tolerances, can be installed without matching.
Back idlers can be used.

