JUUKO HS-K6061R1T Dual speed Remote Control and Receiver, 6 Button, 1 transmitter

The JUUKO HS Series is a radio remote control and receiver set for electric hoists and cranes, listed in the Pacific Hoists catalogue as a medium-size JUUKO receiver (manufacturer-stated). This page lists the 6 button, dual speed models, with 1 or 2 transmitters. The transmitter runs on AA batteries and the catalogue gives a 100m range with range control and close-start functionality (manufacturer-stated).

The catalogue lists, for the HS receiver, 2 stop relays, 2 start relays and 13 command relays, automatic frequency switching to avoid radio interference, onboard data logging, and compatibility with K-Series transmitters up to 8 buttons (manufacturer-stated). The receiver voltage is a range of 24 to 240V AC/DC and the frequency band is 433 (manufacturer-stated).

The 6 button model has dual speed. The catalogue gives its receiver voltage as 24 to 240V AC/DC.

The catalogue gives no radio or electrical approvals for the JUUKO range, so none are published here: if your site needs them, ask for the maker's documents before you buy. The catalogue lists only the R1T part number for each model; the R2T version is the one carried in the store with 2 transmitters.

Where this product is used

• Controlling an overhead crane or electric hoist from a safe distance
• Operating a hoist while guiding or positioning the load
• Replacing or adding a radio control to a hoist with a control voltage inside the receiver range

Features

• HS Series medium-size receiver (manufacturer-stated)
• 6 buttons, dual speed
• 2 stop relays, 2 start relays and 13 command relays (manufacturer-stated)
• Automatic frequency switching to avoid radio interference (manufacturer-stated)
• 100m range with range control and close-start functionality (manufacturer-stated)
• Onboard data logging (manufacturer-stated)
• Receiver voltage 24 to 240V AC/DC (manufacturer-stated)

Common specifications

Key specifications

Figures are as printed in the Pacific Hoists catalogue (manufacturer-stated). Number of transmitters is the store option for each model.

Selecting the right option

Check that the receiver voltage range suits the control supply of your hoist or crane, that the button count and speed match the functions you want to control, and that the receiver is wired to the hoist control circuit by a qualified person. Check the number of transmitters you need. Choose between 1 and 2 transmitters on the model number: the part number ends R1T or R2T.

Related products

See also Hitachi three phase electric chain hoists and Pacific Porta Hoist electric chain hoists.