M6 x 20 mm Phillips Pan Head Machine Screw, 316 Stainless Steel - PPSA4M6X20
The price shown is for the box.
Available
The Metric Phillips Pan Head (Machine) Screw, 316 Stainless Steel is available in 81 sizes (M3 to M10) and is a machine-thread screw with a rounded pan head and a Phillips cross recess. It screws into a nut or tapped hole and is the standard choice for general light assembly.
This listing has 81 variants covering sizes M3 to M10 and lengths 6 mm to 100 mm. Variants are supplied in packs of 50 to 100, depending on size.
The A4 (316) grade is stainless steel with added molybdenum, which helps it hold up where salt, pool chemicals or washdown chemicals are present. It is the more corrosion-resistant of the two common stainless grades, at a higher cost than 304. Metric sizes are written M followed by the nominal thread diameter in millimetres, so M10 is a 10 mm thread.
Austenitic stainless steel is generally non-magnetic, although cold-worked parts can show weak magnetism. Use stainless washers and nuts with stainless fasteners, so the whole joint is made of the same material.
Where this product is used
- Small sizes for enclosures, instruments and light fittings
- Appliance and equipment assembly
- Chemical and washdown areas
- Electrical enclosures, switchboards and fittings
- Outdoor fittings exposed to salt air
- Light machinery covers and panels
Features
- Phillips cross recess for common screwdrivers
- Metric thread sizes match the nuts, bolts and tapped holes in most Australian-supplied equipment
- Lengths from 6 mm to 100 mm
- Pack quantities to suit trade and bulk buying: packs of 50 to 100
- Pan head sits proud with a rounded, clean profile
- A4 (316) stainless steel with molybdenum, for coastal and chloride-exposed settings
Key specifications
| Specification | Detail |
|---|---|
| Product | Metric Phillips Pan Head (Machine) Screw |
| Type | Machine-thread screw with a rounded pan head and a Phillips cross recess |
| Material | A4 (316) stainless steel |
| Typical environment | Coastal, marine, pool and food-processing use |
| Fitting tip | Use anti-seize on the thread to reduce galling |
| Thread system | Metric |
| Pack quantity | 50 to 100, by size |
| Size range | M3 to M10 |
| Lengths available | 6 mm to 100 mm |
| Magnetic response | Generally non-magnetic (austenitic); cold-worked parts can show weak magnetism |
| Drive | Phillips |
| Key features | Pan head sits proud with a rounded, clean profile; Phillips cross recess for common screwdrivers |
| Number of variants | 81 |
| Head type | Pan |
Selecting the right option
Use a correctly sized Phillips driver. Stainless is softer than hardened steel, so avoid power drivers at speed. A drop of anti-seize on the thread helps prevent galling. For indoor and general outdoor use where chlorides are not a concern, the A2 (304) version is the lower-cost option: Metric Phillips Pan Head (Machine) Screw - 304 Stainless Steel.
Related products
Other versions in this range: BSW Phillips Pan Head (Machine) Screw - 304 Stainless Steel and BSW Phillips Pan Head (Machine) Screw - 316 Stainless Steel. Matching products: Metric Standard Hex Nut - 316 Stainless Steel, Metric Hex Nylon Insert Lock Nut - 316 Stainless Steel and Flat Round Washer DIN125A Stainless Steel.
Resources
Couldn't load pickup availability
Secure Checkout. We do not store credit card details
Metric Phillips Pan Head (Machine) Screw - 316 Stainless Steel: M6 / 20 mm
SKU: A0073524 | Model: PPSA4M6X20
PPSA4M6X20: M6 x 20 mm Phillips pan head machine screw, 316 Stainless Steel. Sold in a box of 100. Suits electrical enclosures, switchboards and fittings.


