Ninja Cut C gloves, XL

The Ninja RAZR NFT CA3 glove is a lightweight cut resistant glove with a high performance composite liner and a black NFT (New Foam Technology) coat on the palm and knuckle. The coat gives grip in oily, dry and wet conditions, the thumb and forefinger are reinforced for longer glove life, and the coat lets air through for breathability. The liner is HPPE, glass, nylon and spandex in white and blue melange.

It has EN 388:2016 4X42C, which is abrasion 4, blade cut not tested, tear 4 and puncture 2, with a cut result of C. Ninja also gives EN 407:2004 X1XXXX. The EN 407 result is read in the order burning behaviour, contact heat, convective heat, radiant heat, small molten metal splash and large molten metal splash. An X means that test was not done, so the glove has no rating for it. Contact heat level 1 is the lowest level, so this is not a heat resistant glove.

Where this product is used

• Mining, construction and infrastructure
• Automotive and manufacturing
• Goods handling
• Product inspection, assembly and maintenance

Features

• NFT coat for oily, dry and wet grip
• Composite HPPE, glass, nylon and spandex liner
• Cut result C (EN 388:2016 4X42C)
• Reinforced thumb and forefinger
• Breathable coat

Key specifications

Choosing the right option

Choose the CA3 for cut risk in general industrial work where grip and dexterity matter. For a lower cut result see the Maxim Cut 3 glove, and for higher results see the RAZR Diamond 5 glove and Slash-Tec FA6 glove.

Other Ninja cut resistant gloves: Maxim Cut 3 glove, Maxim Cut 3 Oil glove, RAZR Diamond 5 glove.