B-Safe Tradie Roofers Kit, Harness, Rope Line with Energy Absorber (BK061215TRAD)

The B-Safe Tradie Roofers Kit, code BK061215TRAD, is a boxed set for roof work. B-Safe's data sheet lists an all purpose fall arrest harness with front and rear fall arrest attachment points and warning load indicators, a 15 m kernmantle rope safety line with an eye at one end and a BSM0012 manual rope adjuster with a built in energy absorber, an attachment strap, a steel twist lock karabiner and a backpack (manufacturer-stated). It is for domestic roofing and commercial or industrial roofing (manufacturer-stated).

B-Safe's data sheet gives a capacity of 140 kg for one person and a weight of 5.5 kg, and says the karabiner is manufactured to EN 362 and ANSI certified (manufacturer-stated). B-Safe's data sheet shows a Global-Mark certification mark for AS/NZS 1891.1:2020 (manufacturer-stated). Ask AIMS for the certificate that applies to the kit supplied.

B-Safe's catalogue lists the contents as the BH01120 fall arrest harness, a 15 m rope safety line (BS010115A) with a double action self-locking hook at one end, a manual rope adjuster and an energy absorber, a 1.5 m attachment strap (BP03101.5, 25 mm web, rated for 1 person), two alloy steel twist lock karabiners (BSK0003-16) and the backpack (manufacturer-stated). Unlike the Professional Roofers Kit, this kit has no suspension trauma straps listed. The harness size is not stated, so ask AIMS which size is supplied.

B-Safe's technical guide says to inspect fall protection equipment before each use, to check the date of manufacture and the remove from service date on the label, and to take any equipment that has been used to arrest a fall out of use and return it to the supplier for inspection and certification, or destroy it (manufacturer-stated).

Fall protection equipment must be selected, installed, used, inspected and maintained by trained people in line with the manufacturer's instructions and the relevant Australian Standards. Ask AIMS for the instructions and test certificates before you order, and never use it for any purpose other than the one it was made for.

Where this product is used

• Roof work where the wearer is held in restraint on a rope line connected to an anchor, using the attachment strap or a T-bar anchor (manufacturer-stated)
• Domestic roofing and commercial or industrial roofing (manufacturer-stated)

Features

• All purpose fall arrest harness with front and rear attachment points and warning load indicators (manufacturer-stated)
• 15 m kernmantle rope safety line with an eye at one end and a BSM0012 manual rope adjuster with built in energy absorber (manufacturer-stated)
• Attachment strap for use as a temporary anchorage connection, suitable for a single person fall arrest (manufacturer-stated)
• Steel twist lock karabiner made to EN 362 and ANSI certified (manufacturer-stated)
• Backpack that protects the kit from dirt and grime and carries it hands free (manufacturer-stated)
• Weight 5.5 kg (manufacturer-stated)

Kit contents (B-Safe catalogue)

Roofers kit safety steps

B-Safe's catalogue gives a six step guide for the roofers kit (manufacturer-stated). (1) Set the ladder and establish the anchor, then connect the rope line using the attachment strap or the T-bar anchor. (2) Test the connection, move the adjuster knot end and throw it to the opposite end. (3) Relocate the ladder, pull the rope tight, put on the harness, connect the shock absorber or lanyard to the adjuster and squat to test the tautness of the rope line. (4) Climb the ladder, moving the adjuster as you climb to minimise free fall before the shock absorber would be deployed. (5) Take care when transferring to the roof and establish the restraint technique position. (6) Once the restraint position is established, work within a 60 degree arc and avoid pendulum swing falls. B-Safe adds that there is no substitute for competency based training.

Key specifications

Selecting the right option

Check with AIMS which harness size is in the kit and that it suits the wearer, and check the rope line, energy absorber and attachment strap before each use. B-Safe's manuals say a rescue plan should form part of the use of fall protection equipment, because prolonged hanging in a harness while waiting for rescue could allow the onset of suspension intolerance (manufacturer-stated). If you want suspension trauma straps with it, see the suspension trauma straps page.

Related products

Other B-Safe fall protection: the roof anchor T-bar, the attachment strap, the suspension trauma straps and the shock absorbing lanyard. A kit is one part of a system, so check every item before you order.