Q-Bond Adhesive Range — Quick Reference
Q-Bond is the specialist adhesive system combining CYANOACRYLATE superglue + REINFORCING POWDER → extremely strong + fast-curing repairs on wide range of materials. Practical bonding solution for workshop + field repairs where conventional adhesives fall short.
| Q-Bond Product | Best For |
|---|---|
| Q-Bond Repair Kit (Powder + CA) | Plastic + metal + ceramic + composite repairs — fast cure |
| Powder (Black / Brown / White) | Colour-matched to substrate — powder fills + reinforces bond |
| Cyanoacrylate Activator/Adhesive | CA glue with rapid cure when combined with Q-Bond powder |
| Aerosol Activator | Spray-on cure accelerator for harder-to-bond surfaces |
How it works: Apply powder to fill gap or build up surface — apply CA adhesive on top — instant cure (seconds). Bond is MUCH stronger than CA alone because powder provides structural reinforcement. Particularly useful for: cracked plastic + chipped trim + composite repairs + filling gaps in metal that solder can't reach. Critical: Surface must be CLEAN + DEGREASED. Excess powder can be sanded after cure for smoother finish. Brand: Q-Bond. Companion: adhesives + sealants + tapes, Loctite, epoxy adhesives.
Q-Bond Adhesives at AIMS Industrial
Q-Bond is a specialist adhesive system that combines cyanoacrylate superglue with a unique reinforcing powder to create extremely strong, fast-curing repairs on a wide range of materials. AIMS Industrial stocks Q-Bond repair kits and adhesive — a practical bonding solution for workshop and field repairs where conventional adhesives fall short.
Q-Bond Products at AIMS
The Q-Bond system works by applying the powdered filler first, then saturating with the liquid adhesive to create a hard, dense repair matrix. Products available at AIMS include:
- Q-Bond QB2 Small Repair Kit — ultra-strong adhesive with reinforcing powder, compact kit for on-the-job repairs
- Q-Bond Ultra Strong Adhesive Large Repair Kit — larger volume for more substantial repair work or frequent use
- Q-Bond QB4 Adhesive 10ml Superglue — the liquid adhesive component supplied separately for topping up kits or general cyanoacrylate bonding
What Q-Bond Can Repair
Q-Bond bonds and repairs plastics, metals, ceramics, rubber, composites, wood and most workshop materials. It's particularly effective for repairing cracked plastic housings, broken tabs, chipped metals, ceramic parts and rigid composites — repairs that are difficult or impossible with standard adhesives alone.
For questions about adhesive selection for specific repair applications, contact our team. AIMS Industrial has been supplying Australian workshops and maintenance teams since 1988.
People Also Ask — Q-Bond
Q: How does Q-Bond's powder-and-adhesive system actually create a stronger repair than glue alone?
Powder is applied first to fill the gap or build up the surface, then cyanoacrylate adhesive is applied on top and cures in seconds — the powder gives the cured bond structural reinforcement that CA adhesive alone can't provide, since a plain glue joint has nothing to resist flex or impact beyond the adhesive layer itself.
Q: What kind of repairs is Q-Bond best suited to?
Q-Bond is particularly effective on cracked plastic housings, broken tabs, chipped trim, chipped metal, and rigid composite parts — repairs that are difficult or impossible with standard adhesives alone because the damage needs both gap-filling and a hard, dense repair matrix rather than just a bonded seam.
Q: Why does Q-Bond powder come in black, brown, and white?
The coloured powders let the repair be colour-matched to the substrate being repaired, so the filled and reinforced area blends in rather than showing as an obvious contrasting patch once the repair is sanded and finished.
Q: What does Q-Bond's aerosol activator do that the powder and adhesive alone don't?
It's a spray-on cure accelerator for surfaces that are harder to bond, applied to the joint to speed and secure the cure where the powder-and-adhesive combination alone would set too slowly or unreliably on those more difficult material combinations.
Q: Does contamination on the part actually stop Q-Bond's powder-and-adhesive system from bonding properly?
Yes — the surface has to be clean and degreased before starting, because contamination weakens the bond no matter how much powder and adhesive is built up on top of it. Once the repair has cured, any excess powder can be sanded back for a smoother, more finished result.